$0.00 – $50.00
White BOPP Roll Label Printing Specifications:
Water and oil resistant opaque white polypropylene labels.
Sizes Available:
- Sizes range from 1″ x 1″ to 6.5″ x 6.5″
Sides:
- Print Front Only
Lamination:
- Silk Lamination
- No Lamination
Shapes:
- Circle
- Square with Rounded Corners
- Rectangle with Rounded Corners
- Oval
Material:
Semi-Gloss Paper is a budget-friendly solution that doesn’t sacrifice quality for economy. Semi-Gloss Paper stock has a permanent adhesive that sticks well to a variety of surfaces. It is not resistant to oil or water and is recommended for indoor use only.
NOTE: There’s no option for square corners on any of our Roll Labels. All square and rectangle shapes come standard with rounded corners. Bleed is different for Roll Labels than for our normal stickers. Please download the appropriate template for your files.
Shipping Timeframes
California
shipping times based on Pacific Standard TimeFile Setup
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.
If you are uploading PDF files created in Photoshop, please be sure all layers are flattened.
We also accept .JPG (JPEG), and .TIF (TIFF) file types, however PDF is the preferred format.
Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.
- Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
- Use a minimum resolution of 300 dpi for image files.
- Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
- Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.